A view of the bonnets surface showing a reflaction in the primer coats,indicating the smooth surface prior to final primer coats and finish coats.
Right rear corner of the roof ,still a few imperfections to clear up but almost finished.
Feed pump for Fuel injection. The pump besides looking pretty rough wasn’t working very well so has been stripped and inspected.
The commutator on the armature is completely worn out .Possibly because the brushes had been replaced with ones that are too hard.
The lower armature bearing was seized because of water getting in at some time .
Both Horns have stripped to remove Rust and ensure correct function.
Horn diaphragms have been cleaned to remove all traces of rust prior to repainting.